What do mosfet drivers do

The magenta signal is the drive signal seen before the series resistor. You can see the effect of the gate current limitation on the rise and fall times as well as the delay. In the simulation examples given the gate drive used is 15V. Also, it has individual input pins so the timing of each transistor can be individually controlled so you can introduce a dead-band if necessary when neither transistor is turned on.

The image below shows a comparison of drain currents with no series gate resistor yellow trace and W blue trace with the gate current limited to mA. The magenta signal is the drive signal seen before the series resistor. You can see the effect of the gate current limit on the rise and fall times and the delay. In the simulation example given, the gate drive used is 15V.

Higher carrier mobilities are preferred as they mean that the NMOS transistor has a lower resistance to a particular size and gate capacitance than the MIMO.

Low Side. Typically used for protection, power distribution, relays, and motor applications. High Side. Typically used in power distribution, protection and load switch applications.

High Side or Low Side. Half Bridge Drivers. Full Bridge Drivers. Typically used in BLDC motor applications. Selector Tool. Browse Products. Quick Glance: High peak output current: 12A typical Wide operating range: 4.

Explore Product.